HTS 7208
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
As of Revision 22 (2026), effective Oct 30, 2026Source: USITC HTS ↗
Chapters › 7208
Chapter 99 measures listing products under 7208
Articles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Russia14 listed productsEffective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
China18 listed products
Lines under 7208
| HTS | Description | General | Column 2 |
|---|---|---|---|
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief: | ||
| 7208.10.15.00 | Pickled | Free | 0.4¢/kg + 20% |
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | Free | 20% |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | Free | 20% |
| 7208.25 | Of a thickness of 4.75 mm or more: | ||
| 7208.25.30.00 | Of high-strength steel | Free | 20% |
| 7208.25.60.00 | Other | Free | 0.4¢/kg + 20% |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 0.4¢/kg + 20% |
| 7208.26.00.30 | High-strength steel | ||
| 7208.26.00.60 | Other | ||
| 7208.27.00 | Of a thickness of less than 3 mm | Free | 0.4¢/kg + 20% |
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | ||
| 7208.27.00.45 | Other | ||
| 7208.27.00.60 | Other | ||
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | 20% |
| 7208.36.00.30 | High-strength steel | ||
| 7208.36.00.60 | Other | ||
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 20% |
| 7208.37.00.30 | High-strength steel | ||
| 7208.37.00.60 | Other | ||
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 20% |
| 7208.38.00.15 | High-strength steel | ||
| 7208.38.00.30 | With untrimmed edges | ||
| 7208.38.00.90 | Other | ||
| 7208.39.00 | Of a thickness of less than 3 mm | Free | 20% |
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | ||
| 7208.39.00.25 | Other | ||
| 7208.39.00.30 | With untrimmed edges | ||
| 7208.39.00.90 | Other | ||
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief: | ||
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | 20% |
| 7208.40.30.30 | Of a thickness exceeding 10 mm | ||
| 7208.40.30.60 | Other | ||
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | 20% |
| 7208.40.60.30 | Of a thickness less than 3 mm | ||
| 7208.40.60.60 | Other | ||
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | 20% |
| 7208.51.00.30 | Universal mill plate | ||
| 7208.51.00.45 | Of high-strength steel | ||
| 7208.51.00.60 | Other | ||
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 20% |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 20% |
| 7208.54.00.00 | Of a thickness of less than 3 mm | Free | 20% |
| 7208.90.00.00 | Other | Free | 20% |