HTS 7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
As of Revision 22 (2026), effective Oct 30, 2026Source: USITC HTS ↗
Chapters › 7219
Chapter 99 measures listing products under 7219
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
China14 listed products
Lines under 7219
| HTS | Description | General | Column 2 |
|---|---|---|---|
| 7219.11.00 | Of a thickness exceeding 10 mm | Free | 29% |
| 7219.11.00.30 | Of a width not exceeding 1575 mm | ||
| 7219.11.00.60 | Of a width exceeding 1575 mm | ||
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 29% |
| 7219.12.00.02 | Not annealed or not pickled | ||
| 7219.12.00.06 | Of high-nickel alloy steel | ||
| 7219.12.00.21 | Of a width not exceeding 1575 mm | ||
| 7219.12.00.26 | Of a width exceeding 1575 mm | ||
| 7219.12.00.51 | Of a width not exceeding 1575 mm | ||
| 7219.12.00.56 | Of a width exceeding 1575 mm | ||
| 7219.12.00.66 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.12.00.71 | Other | ||
| 7219.12.00.81 | Other | ||
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% |
| 7219.13.00.02 | Not annealed or not pickled | ||
| 7219.13.00.31 | Of a width of 1370 mm or more | ||
| 7219.13.00.51 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.13.00.71 | Other | ||
| 7219.13.00.81 | Other | ||
| 7219.14.00 | Of a thickness of less than 3 mm | Free | 29% |
| 7219.14.00.30 | Of a width of 1370 mm or more | ||
| 7219.14.00.65 | Of high-nickel alloy steel | ||
| 7219.14.00.90 | Other | ||
| 7219.21.00 | Of a thickness exceeding 10 mm | Free | 29% |
| 7219.21.00.05 | Of high-nickel alloy steel | ||
| 7219.21.00.20 | Of a width not exceeding 1575 mm | ||
| 7219.21.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | ||
| 7219.21.00.60 | Of a width exceeding 1880 mm | ||
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 29% |
| 7219.22.00.05 | Of high-nickel alloy steel | ||
| 7219.22.00.15 | Of a width not exceeding 1575 mm | ||
| 7219.22.00.20 | Of a width exceeding 1575 mm but not exceeding 1880 mm | ||
| 7219.22.00.25 | Of a width exceeding 1880 mm | ||
| 7219.22.00.35 | Of a width not exceeding 1575 mm | ||
| 7219.22.00.40 | Of a width exceeding 1575 mm but not exceeding 1880 mm | ||
| 7219.22.00.45 | Of a width exceeding 1880 mm | ||
| 7219.22.00.70 | Of a width not exceeding 1575 mm | ||
| 7219.22.00.75 | Of a width exceeding 1575 mm but not exceeding 1880 mm | ||
| 7219.22.00.80 | Of a width exceeding 1880 mm | ||
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% |
| 7219.23.00.30 | Of a width of 1370 mm or more | ||
| 7219.23.00.60 | Other | ||
| 7219.24.00 | Of a thickness of less than 3 mm | Free | 29% |
| 7219.24.00.30 | Of a width of 1370 mm or more | ||
| 7219.24.00.60 | Other | ||
| 7219.31.00 | Of a thickness of 4.75 mm or more | Free | 29% |
| 7219.31.00.10 | In coils | ||
| 7219.31.00.50 | Not in coils | ||
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 29% |
| 7219.32.00.05 | Of high-nickel alloy steel | ||
| 7219.32.00.20 | Containing more than 0.5 percent by weight of nickel | ||
| 7219.32.00.25 | Other | ||
| 7219.32.00.35 | Of high-nickel alloy steel | ||
| 7219.32.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.32.00.38 | Other | ||
| 7219.32.00.42 | Containing less than 15 percent by weight of chromium | ||
| 7219.32.00.44 | Other | ||
| 7219.32.00.45 | Of a width of 1370 mm or more | ||
| 7219.32.00.60 | Other | ||
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | 29% |
| 7219.33.00.05 | Of high-nickel alloy steel | ||
| 7219.33.00.20 | Containing more than 0.5 percent by weight of nickel | ||
| 7219.33.00.25 | Other | ||
| 7219.33.00.35 | Of high-nickel alloy steel | ||
| 7219.33.00.36 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.33.00.38 | Other | ||
| 7219.33.00.42 | Containing less than 15 percent by weight of chromium | ||
| 7219.33.00.44 | Other | ||
| 7219.33.00.45 | Of a width of 1370 mm or more | ||
| 7219.33.00.70 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | ||
| 7219.33.00.80 | Other | ||
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | 29% |
| 7219.34.00.05 | Of high-nickel alloy steel | ||
| 7219.34.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.34.00.25 | Other | ||
| 7219.34.00.30 | Containing less than 15 percent by weight of chromium | ||
| 7219.34.00.35 | Other | ||
| 7219.34.00.50 | Not in coils | ||
| 7219.35.00 | Of a thickness of less than 0.5 mm | Free | 29% |
| 7219.35.00.05 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.35.00.15 | Other | ||
| 7219.35.00.30 | Containing less than 15 percent by weight of chromium | ||
| 7219.35.00.35 | Other | ||
| 7219.35.00.50 | Not in coils | ||
| 7219.90.00 | Other | Free | 29% |
| 7219.90.00.10 | Of high-nickel alloy steel | ||
| 7219.90.00.20 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | ||
| 7219.90.00.25 | Other | ||
| 7219.90.00.60 | Containing less than 15 percent by weight of chromium | ||
| 7219.90.00.80 | Other |